Massey Ferguson Tractors & Farm Implements Sale
MOULD BOARD PlOUGH |
||
Specifications |
||
|
Model
|
MT-02 (M)
|
MT-02 (H)
|
| Max. Depth |
22 cms
|
25 cms
|
| Working width |
85 cms
|
90 cms
|
| Weight. |
225 kg
|
355 kg
|
| Tractor Compatibility |
35 to 50 HP
|
60 Plus HP
|
| Linkage Category |
I
|
II
|
In order to have further information about Mould Board Plough, please contact us.
| The Offset Disc Harrow has a heavier weight per Disc and thus have the penetration ability to break down large clods normally left after disc ploughing or Chisel Ploughing in hard grounds. It is robust construction, used as mounted or trailed and ideal for chopping and mixing of stubbles and crop residues in the soils. | ||
|
.
 |
||
Specifications: |
||
| 1. Model | OTI-03 | OTI-03 |
| 2. No. of Discs | 14 Discs | 16 Discs |
| 3. Disc Size | 61 cm (24″) | 61 cm (24″) |
| 4. Weight | 590 Kgs | 685 Kgs |
| 5. Working Width | 145 cm (57″) | 167.5 cm (66″) |
| 6. Tractor Compatibility | 50 HP | 60-85 HP |
In order to have further information about Offset Disc Harrow, please contact us.
Rear Blade |
|
|
.
 |
|
Specifications: |
|
| 1. | Mounting construction: Category 1, three-point linkage entirely steel frame, Reversible high carbon steel cutting edge. |
| 2. | Blade Angle: Adjustable 0° to 70° in two increments to either side and similarly with blade facing rearward. |
| 3. | Blade pitch: Adjustable from 0° to 40° |
| 4. | Blade Width: 7 ft. |
| 5. | Overall length 5 ft. (with grader wheel) |
| 6. | Weight 170 kg |
| 7. | Accessories: Grader wheel kit |
| 8. | Tractor Compatibility: 35- 85 hp |
In order to have further information about Rear Blade, please contact us.
Rear Mounted Dozer |
|
|
.
 |
|
Specifications: |
|
| 1. | The blade may be offset and angled. |
| 2. | The cutting edge is high carbon and replaceable. |
| 3. | Full 360 blade turn. |
| 4. | The main frame is constructed of formed plate with extra reinforcing. |
| 5. | OPTIONAL ACCESSORIES (on request) Wheels for depth control. |
In order to have further information about Rear Mounted Dozer, please contact us.
Potato Digger Spinner |
||
| It is also operating by P.T.O (Power Take Off) shaft of tractor, and connected by three point linkage of tractor. It digs the potato by its rotating wings, and spread the potato on the fields.It is recommended for those who have not wide area. |
In order to have further information about Potato Digger Spinner, please contact us.
Jib Crane
|
|
Specifications |
|
| Lift Capacity | Up to 500 kgs(Depending upon tractor HP) |
| Weight (approx.) | 70 Kgs |
| Tractor Compatibility | 45-85 HP |
| Hitch Pin | Cat-II |
In order to have further information about Jib Crane, please contact us.
Corn Harvester |
| Corn harvester of a line adaptable to tractors with minimum power of 65 HP. It harvests, unpacks the straw, threshes, cleans, stores and transports the harvested corn to the transport vehicle. Equipped with collector chute with adjustable height, system of rollers that harvest and separate the corncobs leading them to the endless worm. The axial trailing system unpacks the straw and threshes, separating the grains, leading them to the head with registers for air regulation. It has a granary with capacity of 730 liters, hydraulic command driven discharge chute, support wheel and tire 700 x 16 – 10 canvases. The tractor coupling system is carried out through bumper developed in accordance with the brand and model of the tractor. |
In order to have further information about Corn Harvester, please contact us.
Rice Thresher |
||
| The thresher is operated like conventional wheat thresher by tractor PTO. Its threshing mechanism is based on well-known axial-flow system. The crop is fed into the machine from one end. During the process, the grains are separated and fall down on vibrating sieves where they receive air blow for cleaning. The clean grains are discharged at main grain outlet. The left over un-threshed material is recycled through the threshing drum with the help of an auger conveyor. | ||
Specifications: |
||
| Length: | 330 cm | |
| Width: | 187 cm | |
| Height: | 181 cm | |
Threshing Cylinder: |
||
| Length: | 181 cm | |
| Diameter: | 49 cm | |
| Type: | Peg-tooth | |
| Threshing System | Axial Flow | |
| Cleaning system: | Centrifugal Blower | |
Performance Parameters: |
||
| Grain Output: | 1.5-2 tons/hr | |
| Cleaning Efficiency: | 99% | |
| Grain Breakage: | Almost Nil | |
| Power Requirement: | 65 HP Tractor | |
| Labor Requirement: | Four persons | |
| PTO Speed: | 540 RPM | |
| Fuel Consumption: | 7 – 7.5 Liter/hr | |
In order to have further information about Rice Thresher, please contact us.
Fodder Cutter |
||
|
Car Junction Offers Tractor Implements including Fodder Cutter specially for Uganda Customer at reasonable price.
|
||
Specifications: |
||
| No. of Discs | 2 | 2 |
| No. of Knifes | 6 | 6 |
| Working Width | 1250 mm | 1650 mm |
| Tractor HP (PTO) | 540 rpm | 540 rpm |
| Tractor HP | Above 50 HP | Above 50 HP |
| Weight | 180 kg | 375 kg |
In order to have further information about Fodder Cutter, please contact us.
